Q200 300W/10A Balance Charger/Discharger (SK100104)
SKYRC Q200 is a quattro charger with four independent circuits which can charge four different kinds of batteries simultaneously. It also supports power distribution in AC mode to get max charging power to shorten charging time. What's more, users could set the terminal voltage by themselves and connect it to PC for PC control and firmware upgrade. Besides that, users could also use it as Lithium Battery Meter and Battery Internal Resistance Meter as well. There are Automatic Charging Current Limit, Capacity Limit, Temperature Threshold and Processing Time Limit which makes the charger safe to use.
In AC mode, it supports power distribution, for example, Channel A = 65W and C = 35W, then Channel B = 80W and D = 20W, the total power is 200W.
4 Charging Qutputs
The charger can handle up to four different battery types at the same time and charge them simultaneously.
As well it has a LIHV Mode Available
The additional LiHV mode is able to charge the new generation of LiPo batteries with an end of charge voltage of 4.35 V.
During the manufacturing process every Q200 production unit gets tested and calibrated after highest factory standards. Ambitious users who trust their own expensive equipment more or who prefer their personal fluke to serve as reference have the possibility to adjust the Q200 factory calibration by a few counts.
- Large screen LCD
- Terminal Voltage Control
- Re-peak Mode for NiMH/NiCd Battery
- Battery Meter
- Battery Internal Resistance Meter
- PC Communications: USB Port for PC Control & Firmware Upgrade
- "Scan to Go" function with the SkyCharger App
- Four channels charge four different kinds of batteries simultaneously
- Support charging power distribution intellectively when operating with AC input
The user can monitor pack voltage, cell voltage and other data during the charging, view charge data in realtime graphs, and can also control charging and update firmware from "Charge Master".
Enhance your charger with the SkyCharger APP
The Bluetooth 4.0 connectivity allows the user to remote control and monitor the Q200 comfortably through an app on a portable device such as smartphone, iPad, or iPhone. The iOS app can be downloaded from iTunes Store, the Android app from Google Play Store. Operation of the app is self-explanatory and the same on iOS and on Android. Explicit pairing is not required; after download and installation just activate Bluetooth on your mobile device and launch the app. Q200 and your device will establish Bluetooth connection automatically.
|Input Voltage||AC 100-240V
|Charge Circuit Power
|CH "A" & CH "B" = 100W
CH "C" & CH "D" = 50W
|Charge Circuit Power
|CH "A" + CH "C" = 100W
CH "B" & CH "D" = 100W
CH "A" / CH "B" = 50-100W
CH "C" / CH "D" = 0-50W
|Discharge Circuit Power||4 x 10W|
|Charge Current Range||CH "A" / CH "B" = 0,1-10A
CH "C" / CH "D" = 0,1-5A
|Discharge Current Range||0.1 - 2.0A (4x)|
|Current Drian for Balancing Port||Max. 200mA / cell|
|Trickle Charging Current||50mA - 300mA & OFF|
|Maximum Cells||LiPo/LiFe/LiIon: 1-6 cells
NiMH/NiCd: 1-15 cells