LiFePo Receiverpacks

by Admin (comments: 5) Robitronic

LiFePo Receiverpacks 6,6V

Receiverpack in a hardcase for nitrocars.
Often the 7,4 Voltage from a LiPo Pack ist to much for receivers or servos. If you do not want to use a regulator, you can use Robitronics LiFePo Pack with 6,6 Volt directly!

LiFe 6,6V; 2000mAh, 2/3A Hump

Item No.: R05208
 
Technical Data:
 
  • 2/3A Hump,
  • Type: LiFePo
  • Capacity: 2000mAh (Hump, R05208)
  • Voltage: 6,6V (2S)
  • Energie: 13,2Wh
  • Measures: (LxBxH) 56x32x32mm
  • Weight: 95g.
  • Charge: 1C

Note: Max Voltage per cell: 3,6V (charge), min Voltage per cell: 2,3V (discharge)

LiFe 6,6V; 1600mAh, 2/3 Straight

Item No.: R05205
 
Technical Data:
  • 2/3A Straight,
  • Type: LiFePo
  • Capacity: 1600mAh
  • Voltage: 6,6V (2S)
  • Energie: 10,5 Wh
  • Measures: (LxBxH) 85x30x17mm
  • Weight: 80g.
  • Charge: 1C

Note: Max Voltage per cell: 3,6V (charge), min Voltage per cell: 2,3V (discharge)

Go back

Add a comment

Comment bydisney princess kitchen

If some one wants expert view regarding blogging then i propose
him/her to pay a quick visit this blog, Keep up the fastidious
job.

Comment bydisney trading pins for cheap

Just want to say your article is as surprising.
The clarity in your post is simply spectacular and
i can assume you are an expert on this subject.
Fine with your permission let me to grab your RSS feed to keep updated with forthcoming post.
Thanks a million and please keep up the enjoyable work.

Comment byTheresia

It's amazing in support of me to have a site, which is helpful designed for my experience.

thanks admin

Comment byDanikaAOdonahue

I was able to find good information from your blog posts.

Comment byAbdulHLiebold

It's very effortless to find out any matter on net as compared to
textbooks, as I found this article at this web site.