Newsletter
LiPo Racing Pack
20-10-2011 16:16
Competition Battery with 50C
LiPo Racing Pack
Newest Generation with extra low resistance to keep higher voltage for the complete run!
The LiPo is secure packed into a hardcase. "T" Connector for lowest contact resistance. Balacer Type: XH
| Voltage: | 7,4V |
| Capacity | 6000mAh |
| Max. Current |
50C (300A) |
| Measurement |
139x47x25,1 |
| Weight | 313g |
Itemnumber: R05227
Lipo Bag
Robitronic’s
LiPo Bags are made from high quality non flammable and heat resistant glass
fibre, firmly stitched to a flame retardant bag. Even in a worst case scenario
with a ruptured or exploding lipo battery inside, the broad Velcro flap will
keep the bag securely closed. Conveniently placed openings in the bag will not
only help to securely deflate it in such a case, but they will also allow you
to comfortably rout the charging leads and balancer-wires into the bag.
At 30x23cm (length x width), Robitronic’s LiPo Bag fits into any Pit bag, yet
is big enough to store every common hardcase or softcase lipo battery.
Itemnumber: R14005
Robitronic Expert LD 16z
The Expert LD 16z features an intelligent charging circuit enabling the
unit to simultaneously detect even multiple errors (brocken cell, user
error…) and hence provide safe charging.
Charger with built-in AC adapter - use at home and at the field .
Balance individual cells during discharge
LiPo, LiIon, LiFe, NiMH, NiCd, Pb
five batteries’ data can be stored
Cyclic charging/discharging for NiXX batteries
Fast and Storage mode charging of LiXX batteries
AC/DC
Including various adapter cables
Processing time limit
Compact size
Temperature probe (optional R01011)
Charger with built-in AC adapter - use at home and at the field .
Balance individual cells during discharge
LiPo, LiIon, LiFe, NiMH, NiCd, Pb
five batteries’ data can be stored
Cyclic charging/discharging for NiXX batteries
Fast and Storage mode charging of LiXX batteries
AC/DC
Including various adapter cables
Processing time limit
Compact size
Temperature probe (optional R01011)
Balanceradapter XH (optional R19034)
Technical Data:
Input Voltage AC: 110-240 V
Input Voltage DC: 11 - 18 V
Charge current: 0,1 - 6,0 A
Discharge current: 0,1 - 1,0 A
Max. charging power: 50 W
Max. discharge power: 5 W
Max. balancer current: 300 mA
Max balancer error: +/- 0,01 V
Number of cells NiXX: 1 - 15 Zellen
Number of supported cells LiXX: 1 - 6 (serie)
Number of supported cells Pb: 1 - 10 (2 - 20 V)
Weight without cabels: 433 g
Dimensions: 135 x 112 x 60,9 mm
Itemnumber: R01005