Now you can get everything in one box and in a matter of a few hours build time be able to hit the rocks with the Axial AX10 Scorpion 1/10 Rock Crawler Kit.
Features
- Complete competition ready kit
- All new axles that feature an improved driveshaft angle and castor as well as class leading steering throw
- Aluminum Chassis plates with a molded nylon skid plate
- Ultra compact and lightweight transmission
- Full time locked four wheel drive
- Full Ball bearings
- Overall gear ratio range from 15:1 to 74:1
- Transmission: 2.6:1; center mounted
- Differentials: Locked style (spool)
- Transmission: Single-speed
- Tires: Axial 2.2 Rock Lizards
- Wheels: Axial 2.2 Rockster Beadlocks
- Suspension: 3 Link
- Drive Shafts: Universal front and rear
Axles
The axles have been designed with many features that
are not available from other choices on the market. Everything from the
axle strength, pinion angle, caster, and ground clearance were taken
into consideration, the result is a stronger better axle that will
last. An aluminum diff locker is included along with hardened drive
shafts and axles.
Chassis
The AX10 Scorpion chassis is lightweight and stiff. Twin 2.0mm aluminum
side plates are tied together with aluminum posts and a molded nylon
skid plate/transmission plate. The chassis was made as small and
compact as possible to cut weight as much as possible. A simple
battery/radio tray makes installation of your electronics quick and
easy. Wheel base is adjustable from 304mm ~ 320mm.
Transmission
The AX10 Scorpion transmission was designed to place the weight of the
motor as low as possible while still allowing a wide range of gearing
choices. The overall ratio can be adjusted from 15:1 all the way up to
74:1 using different pinion/spur gear choices. The transmission is
locked with no differential action and features hard anodized aluminum
out-drive shafts.
Shocks, Links and Driveshaft
Super long shocks offer a wider range of articulation as well as an
optional range of spring choices so you can tune your crawler to work
on any terrain. All suspension links are made from lightweight and
strong aluminum. The driveshaft is made from super strong composite
material and features hardened metal yokes.
Wheels, Tires and Body
No crawler would be complete without the essentials. The AX10 Scorpion
will be outfitted with the popular 2.2 Rockster beadlocks sporting
green rock rings and Rock Lizard tires. Also included is the popular
B-17 Betty body in .040” thick polycarbonate.
| AX10 Specification | |
| • Wheelbase: | 304-320mm |
| • Width: | 254mm |
| • Height: | 156mm |
| • Ground Clearance: | 79mm |
| • Final Drive Ratio: | 2,6:1 |
| • Weight: | 1588g |
| • Articulation: | 70° |
| No. AX90001 |
 |
(Electronic, motor, radio and batteries not in kit included!)